NCM Prague Electric Mountain Bike 250W, 36V 13Ah 468Wh Battery
With a traditional compact frame set and bottle mount battery set up, the NCM Prague is very capable and perfect for commuters and delivery riders. This E-bike is designed with a tough aluminium frame, and a strong rigid handlebar and saddle for improved ergonomics and performance. The high top tube, makes the bike sturdy and strong allowing the power you put down to be effectively transferred to the road. Strong dependable and reliable workhorse capable of everything you throw at it. This is the Ute of E-bikes
Ergonomic bicycle Grips
Comfortable sitting posture
All important controls easily accessible
Supplied with 36V to deliver a high output power
over 468Wh capacity for a longer distance
reach up to 70 km (depending on the conditions)
easily removable battery so you can charge it anywhere
A built-in USB port with 5V to charge mobile phones
Motor:Das-Kit X15 motor, 36V 250W, max speed 25 km/h
Battery:DEHAWK, D5, 36V 13Ah, 468Wh with USB Port
Display:Das-Kit L6, LCD Display
Charger:DC362DE 36V 2A
Frame:Alu. 6061, 440/480/520MM
Forks:Suntour XCT 100mm
Braking System:Tektro Mechanical Disc
Gear Selector:Shimano Altus 7 speed
Front Derailleur:Shimano Altus Triple
Rear derailleur:Shimano Altus 7 speed
Tyre:Schwalbe Black Jack 26"2.1 Schwalbe Smart Sam 27.5×2.25, 29×2.25
Handle Grips:Velo, VLG-1189D3 139mm
Range: Up to 70 km
1 year warranty on all electronic parts (including battery, motor, controller, display, lights)
2 year warranty on the bike frame
Apart from manufacture defects that could be present, parts that wear due to normal use (such as tires, brake pads, chains, spokes, freewheel, tire puncture etc) are not included in the warranty but maybe replaced on a case by case basis within the first 6 months.
Our bikes are water resistant but not waterproof. Water damage is not covered under warranty.
In order to ensure our high-quality standard, our bicycles are subjected to a functional test at the factory. This can lead to dust deposits on the tyres and the seat post. Our bikes are only delivered pre-assembled, a final fine adjustment and inspection by the buyer or a third party are necessary (costs incurred for this cannot be covered). Before riding, please check all screws for strength and carry out a fine adjustment of the gears and brakes. Check the tyre pressure. Depending on the bicycle model, the final assembly and inspection of the components should take between 60 and 90 minutes.
The laws around the use of scooters/e-bikes on public lands, roads and areas vary from state to state.
We recommend you always check your local council and road traffic laws prior to using a scooter/e-bike to ensure you are aware of any restrictions that may affect the use of motorised vehicles.
Always use appropriate protective riding equipment such as an approved helmet and suitable clothing.