Minimal Design, Maximal Performance. The NCM C5 is a fully equipped E-bike for city commutes. Whether you are trying to get to work on time, while being sweat free, or need to rush to your favourite place in style, the all new NCM C5 lets you cover your daily journeys with ease. This E-bike is designed with a tough aluminium frame, and a strong rigid handlebar, a saddle for improved ergonomics and performance, and 250W Das-Kit rear-drive motor with intelligent torque sensor technology. The high-top tube makes the bike sturdy and strong allowing the power you put down to be effectively transferred to the road.
Ergonomic bicycle Grips
All important controls are easily accessible
250W Das-Kit rear-drive motor with intelligent torque sensor technology
Supplied with 36V 432Wh to deliver a high output power
Removable and lockable 36V 432Wh extra large battery capacity
Reach up to 100 km (depending on the conditions)
CST, C1808, 700*30c Black tires
Intelligent Drive System
NCM C5 Large
Das kit, X2, 36V 250W, 25km/h
Das-Kit, I6-3612A, 36V 12AH, 432WH
Das-kit E2 Display
Das-Kit, DC363, 36V3A
Alu. 6061, 560MM
ZF, 5058-02, 27.5'', rigid fork
ZF, 5058-02, 27.5'', rigid fork
Selle Royal, Prestige-1307URN Black
Up to 100 km
Stand Over Height
Min/Max Seat Height
1 year warranty on all electronic parts (including battery, motor, controller, display, lights)
2 year warranty on the bike frame
Apart from manufacture defects that could be present, parts that wear due to normal use (such as tires, brake pads, chains, spokes, freewheel, tire puncture etc) are not included in the warranty but maybe replaced on a case by case basis within the first 6 months.
Our bikes are water resistant but not waterproof. Water damage is not covered under warranty.
NCM Bikes, founded in 2014, has quickly become one of the largest pedelec and e-bike brands in Europe with the goal of expanding the market significantly in the near future. NCM is the perfect brand to start your pedelec experience whether you are an avid cyclist or a relative newcomer, we are committed to providing you with a range of high quality. Our innovative technologies ensure that we can differentiate ourselves from the competition and continue to offer the latest technologies. Our goal is to help improve the environment through a friendly riding experience and the promotion of a fun and active lifestyle.
In order to ensure our high quality standard, our bicycles are subjected to a functional test at the factory. This can lead to dust deposits on the tyres and the seat post. Our bikes are only delivered pre-assembled, a final fine adjustment and inspection by the buyer or a third party is necessary (costs incurred for this cannot be covered). Before riding, please check all screws for strength and carry out a fine adjustment of the gears and brakes. Check the tyre pressure. Depending on the bicycle model, the final assembly and inspection of the components should take between 60 and 90 minutes.
IMPORTANT NOTICE: The laws around the use of scooters/e-bikes on public lands, roads and areas vary from state to state. We recommend you always check your local council and road traffic laws prior to using a scooter/e-bike to ensure you are aware of any restrictions that may affect the use of motorised vehicles. Always use appropriate protective riding equipment such as an approved helmet and suitable clothing.